Single Setting Torque Wrenches


  • Universal torque wrench that can fit both square and hex drivers
  • Easy to use
  • Ratchet clutch disengages (slips) when designated torque is applied to avoid over torquing
  • Achieves consistent pre-loading of implant abutments and screws.
  • Easy maintenance
  • Stainless steel
  • Sterilize by autoclave
SKU: OSD-WR-TRQ Categories: ,


Tightening with the correct torque minimizes the risk of the screw working loose and improves the precision during bridge fabrication. Torque control can also reduce the risk of stress being built into the restoration and prevent component fractures.

This wrench is a pre-calibrated torque wrench system that prevents over and under tightening of implant screws and abutments. It is available in 10Ncm, 20Ncm, 30Ncm, and 35Ncm settings to meet the needs of a variety of implant systems. An assortment of drivers fit all the hex or slot head screws regardless of implant type.

Insert the screw or abutment into the implant with the  driver and tighten with finger pressure. Remove the driver and place into the wrench. Pre-load the screw by using the wrench in the same way as a ratchet wrench. The wrench clutch will disengage when the pre-calibrated torque is applied.


Additional information


10 N/cm, 15 N/cm, 20 N/cm, 30 N/cm, 32 N/cm, 35 N/cm


There are no reviews yet.

Be the first to review “Single Setting Torque Wrenches”

You may also like…